JL-230-Nema-3-Pin-Twist-Lock-Photocontrol-Socket

Ordering Information

*JL-230-14 - **06 - ***G - ****P

-:Lead Guage

14=AWG#14

16=AWG#16

**:Lead Length in inches; (‘06’ as min.)

***:Lead Grade

Null=105 degree C, AWM1015 (standard)

G=150 degree C, AWM3321

****:Contact Material

Null=Brass (standard)

P=Phosphor Bronze

Product Summary

All the JL-230 series dusk to dawn automatic Light Nema 3 Pin Photocontrol Socket are intended to be pre-mounted onto those lanterns designed to fit an ANSI C136.10-1996 twist-lock photocontrol.

Both Nema 3 Pin Photocontrol Socket JL-230-16 and JL-230-14 have been recognized by UL to applicable US and Canadian safety standards, under their file E188110, Vol.2.


Technical Data

JL-230 Nema 3 Pin Twist Lock Photocontrol Socket

JL-230 nema 3 pin photocontrol receptacles.jpg



Model No.JL-230-16JL-230-14
Rated Voltage480VAC Max.
Loading Capacity15Amp Max.
Ambient Temperature-40℃ ~ +70℃
Holding CoverPolycarbonate
ReceptaclePhenolic (Bakelite)
ContactBrass / Phosphor Bronze
GasketSilicon Rubber
Overall Dimensions65mm (Dia.) x 30mm (H)
Lead Guage AWG#16AWG#14




Installation

Disconnect power; wire the receptacle according to the diagram in right hand. An arrow indicating NORTH on the top of the receptacle is used to assist correct direction. Push the photocontroller on and twist it clockwise to lock it into the receptacle. 

Install the photocontroller with the Photocell facing the NORTH direction as indicated on the top of the photocontroller. 

Adjust the receptacle position if necessary.


Initial Testing

For other mounting methods, ask for the drilling plan to ensure the proper securement.